Virtual traumatology of pregnant women: The PRegnant car Occupant Model for Impact Simulations (PROMIS)

This study report documents the development of a finite element (FE) model for analyzing trauma in pregnant women involved in road accidents and help the design of a specific safety device. The model is representative of a 50th percentile pregnant woman at 26 weeks of pregnancy in sitting position. To achieve this, the HUMOS 2 model, which has been validated in a wide range of dynamic tests, was scaled to the morphology of a woman in the 50th percentile and coupled with a model of gravid uterus. During scaling, special attention was paid to the pelvic region which is known to differ considerably in morphological terms between men and women. The gravid uterus model includes a placenta, a fetus, uterosacral ligaments and the amniotic fluid by means of fluid structure interaction formulation. The uterus and the female model were coupled using an original method whereby the growth of an uterus was simulated to compress the abdominal organs in a realistic manner. The model was validated based on experimental tests described in the literature. Additional tests based on abdominal loadings with a seatbelt on Post Mortem Human Surrogates (PMHS) coupled to silicone uterus were also performed.     

Temporal changes of mechanical signals and extracellular composition in human intervertebral disc during degenerative progression

In this study, a three-dimensional finite element model was used to investigate the changes in tissue composition and mechanical signals within human lumbar intervertebral disc during the degenerative progression. This model was developed based on the cell-activity coupled mechano-electrochemical mixture theory. The disc degeneration was simulated by lowering nutrition levels at disc boundaries, and the temporal and spatial distributions of the fixed charge density, water content, fluid pressure, Von Mises stress, and disc deformation were analyzed. Results showed that fixed charge density, fluid pressure, and water content decreased significantly in the nucleus pulposus (NP) and the inner to middle annulus fibrosus (AF) regions of the degenerative disc. It was found that, with degenerative progression, the Von Mises stress (relative to that at healthy state) increased within the disc, with a larger increase in the outer AF region. Both the disc volume and height decreased with the degenerative progression. The predicted results of fluid pressure change in the NP were consistent with experimental findings in the literature. The knowledge of the variations of temporal and spatial distributions of composition and mechanical signals within the human IVDs provide a better understanding of the progression of disc degeneration.     

Evaluation of leaf features in forest trees: Methods,techniques, obtainable information and limits

Tree leaves are interfaces between the whole organism and the environment. Leaves display a series of attributes that are linked to specific functions (functional leaf traits—FLT) and/or show responses to biotic and abiotic stress factors (stress response traits, SRT), which can be subdivided into: (a) morphological traits; (b) chemical traits; (c) physiological traits; (d) symptoms. The analysis of FLT is a useful tool for tree species and provenance phenotyping, due to the adaptation of trees to environmental stress. Additionally, FLT can be used as response factor in long term and large spatial scales surveys of forest conditions. Despite these potential benefits of leaf traits in the assessment of ecosystem health and functioning, leaf sampling in forests is time-consuming and costly, especially in forests with a complex vertical and horizontal structure and in remote forest areas. Once a foliar sample has been collected, many different analyses can be carried out; however, analyses should be technically simple and able to be performed within one day following the leaf collection (i.e., on fresh samples), or after air-drying the leaves themselves (analysis of dried specimens). This paper reports the results of leaf sampling and foliar analyses carried out in previous research projects and revises the current state-of-the-art. The leaf traits that are easily obtainable from leaf sampling are listed, together with the operational procedures necessary for their measurement, described in a standardized protocol. Their ecological and functional relevance is discussed in relation to their potential information (as indicators of climatic stress, drought, air and soil pollution, tree light-use and competition, plant nutritional status, health and general plant stress conditions). Finally, this review provides suggestions for the elaboration and reporting of data, and proposes some guidelines to improve the effectiveness of foliar analysis in the assessment of forest ecosystem health, properties and functioning.     

Biochemical composition of the parasitic amphipod Hyperia galba in relation to age and starvation

Summary Hyperia galba was collected in the waters around Helgoland and in the Weser-Elbe-estuary during autumn. Its mode of life is a temporary but obligatory parasitism. The basal biochemical composition of the adults was analyzed in detail and related to the fresh, dry, and ash-free dry weight as well as sex and body length. Hyperia galba (males/females) consists of 85/86% water; the dry matter contains approximately 64/61% protein, 10/11% lipid, 1.2/1.5% carbohydrate, 10/8% chitin, and 23/23% ash. The analyses of basal elemental composition yielded approximately 38% C, 9% N and 6% H. Under natural conditions, individuals may encounter at least two periods of food shortage during their lives. Therefore, the analyses were carried out on individuals of different developmental stages also under food deprivation. The data are discussed with respect to the special mode of life of the species and compared with those found by other authors in several related crustacean species.Abbreviations AFDW ash-free dry weight - BL body length - DW dry weight - SD standard deviation - WW wet weight     

Population-specific material properties of the implantation site for transcatheter aortic valve replacement finite element simulations

Patient-specific computational models are an established tool to support device development and test under clinically relevant boundary conditions. Potentially, such models could be used to aid the clinical decision-making process for percutaneous valve selection; however, their adoption in clinical practice is still limited to individual cases. To be fully informative, they should include patient-specific data on both anatomy and mechanics of the implantation site. In this work, fourteen patient-specific computational models for transcatheter aortic valve replacement (TAVR) with balloon-expandable Sapien XT devices were retrospectively developed to tune the material parameters of the implantation site mechanical model for the average TAVR population.Pre-procedural computed tomography (CT) images were post-processed to create the 3D patient-specific anatomy of the implantation site. Balloon valvuloplasty and device deployment were simulated with finite element (FE) analysis. Valve leaflets and aortic root were modelled as linear elastic materials, while calcification as elastoplastic. Material properties were initially selected from literature; then, a statistical analysis was designed to investigate the effect of each implantation site material parameter on the implanted stent diameter and thus identify the combination of material parameters for TAVR patients.These numerical models were validated against clinical data. The comparison between stent diameters measured from post-procedural fluoroscopy images and final computational results showed a mean difference of 2.5 ± 3.9%. Moreover, the numerical model detected the presence of paravalvular leakage (PVL) in 79% of cases, as assessed by post-TAVR echocardiographic examination.The final aim was to increase accuracy and reliability of such computational tools for prospective clinical applications.     

A comparison of direct and indirect methods for measuring leaf and surface areas of individual bushes

Indirect estimates of leaf area from measurements with three commercially available instruments (DEMON, LAI-2000 and Sunfleck Ceptometer) were compared with directly measured areas of individual Retama sphaerocarpa bushes. The three indirect methods gave good estimates of the total surface area of individual bushes. For the DEMON, the method of log-linear averaging of transmitted radiation gave estimates closer to directly measured surface area than the method of averaging transmission linearly. For the LAI-2000, estimated surface area index multiplied by canopy projected area gave the best agreement with directly measured values. For measurements with the Sunfleck Ceptometer, values of surface area estimated from the transmission of photosynthetic quantum flux density, without correcting for diffuse radiation, gave the best agreement with directly measured values. Surface areas estimated by the three instruments were not significantly different from directly measured total (leaf + branch + stem) surface areas. Leaf surface area could be calculated from estimated total surface area minus directly measured branch surface area. Measured branch surface area was linearly related to canopy projected area.     

Updated Lagrangian finite element formulations of various biological soft tissue non-linear material models: a comprehensive procedure and review

Simplified material models are commonly used in computational simulation of biological soft tissue as an approximation of the complicated material response and to minimize computational resources. However, the simulation of complex loadings, such as long-duration tissue swelling, necessitates complex models that are not easy to formulate. This paper strives to offer the updated Lagrangian formulation comprehensive procedure of various non-linear material models for the application of finite element analysis of biological soft tissues including a definition of the Cauchy stress and the spatial tangential stiffness. The relationships between water content, osmotic pressure, ionic concentration and the pore pressure stress of the tissue are discussed with the merits of these models and their applications.     

Somatic polyploidy in extraembryonic membranes of the snake,Elaphe guttata

Summary Video-densitometric DNA measurements of Feulgenstained tissues of 42 day old eggs of the corn snake,Elaphe g. guttata (Columbridae, Serpentes), revealed a basic DNA content of 2C=2.17 pg, with somatic polyploidy in the allantois, the chorioallontois, the yolk sac, and other extraembryonic membranes. The maximum value determined was 128C (in binucleate cells 2×128C) at the distal pole of the egg. This is the first report of somatic polyploidy in a snake, and one of the first in reptiles in general.     

Differences in 3D vs. 2D analysis in lumbar spinal fusion simulations

Lumbar interbody fusion is currently the gold standard in treating patients with disc degeneration or segmental instability. Despite it having been used for several decades, the non-union rate remains high. A failed fusion is frequently attributed to an inadequate mechanical environment after instrumentation. Finite element (FE) models can provide insights into the mechanics of the fusion process. Previous fusion simulations using FE models showed that the geometries and material of the cage can greatly influence the fusion outcome. However, these studies used axisymmetric models which lacked realistic spinal geometries. Therefore, different modeling approaches were evaluated to understand the bone-formation process.Three FE models of the lumbar motion segment (L4–L5) were developed: 2D, Sym-3D and Nonsym-3D. The fusion process based on existing mechano-regulation algorithms using the FE simulations to evaluate the mechanical environment was then integrated into these models. In addition, the influence of different lordotic angles (5, 10 and 15°) was investigated. The volume of newly formed bone, the axial stiffness of the whole segment and bone distribution inside and surrounding the cage were evaluated.In contrast to the Nonsym-3D, the 2D and Sym-3D models predicted excessive bone formation prior to bridging (peak values with 36 and 9% higher than in equilibrium, respectively). The 3D models predicted a more uniform bone distribution compared to the 2D model.The current results demonstrate the crucial role of the realistic 3D geometry of the lumbar motion segment in predicting bone formation after lumbar spinal fusion.     

Climatic sensitivity of species’ vegetative and reproductive phenology in a Hawaiian montane wet forest

Understanding how tropical tree phenology (i.e., the timing and amount of seed and leaf production) responds to climate is vital for predicting how climate change may alter ecological functioning of tropical forests. We examined the effects of temperature, rainfall, and photosynthetically active radiation (PAR) on seed phenology of four dominant species and community-level leaf phenology in a montane wet forest on the island of Hawaiʻi using monthly data collected over ~ 6 years. We expected that species phenologies would be better explained by variation in temperature and PAR than rainfall because rainfall at this site is not limiting. The best-fit model for all four species included temperature, rainfall, and PAR. For three species, including two foundational species of Hawaiian forests (Acacia koa and Metrosideros polymorpha), seed production declined with increasing maximum temperatures and increased with rainfall. Relationships with PAR were the most variable across all four species. Community-level leaf litterfall decreased with minimum temperatures, increased with rainfall, and showed a peak at PAR of ~ 400 μmol/m²s⁻¹. There was considerable variation in monthly seed and leaf production not explained by climatic factors, and there was some evidence for a mediating effect of daylength. Thus, the impact of future climate change on this forest will depend on how climate change interacts with other factors such as daylength, biotic, and/or evolutionary constraints. Our results nonetheless provide insight into how climate change may affect different species in unique ways with potential consequences for shifts in species distributions and community composition.